I noticed today when I attempt to generate a new key on my roku 2 and roku 3 devices the telnet prompt exits abruptly. All I did was press enter to type in the genkey command. Both devices are using the latest firmware 7. Any help is appreciated. Thanks.
telnet 192.168.0.12 8080
Trying 192.168.0.12…
Connected to 192.168.0.12.
Escape character is ‘^]’.
Connection closed by foreign host.
This happened the other day to me and a simple power cycle resolved the issue. Did you try that first?
Yes I did. Im going to try a factory reset as a last resort. Thanks!
that happens on what firmware version and model number (“roku 2” means many, many things)?
might be relevant.
EnTerr. I figured out the issue. The Mac i was working on was blocking port 8080. I used another Mac and it worked fine. Thanks!
“uarlive” wrote:
EnTerr. I figured out the issue. The Mac i was working on was blocking port 8080. I used another Mac and it worked fine. Thanks!
Cisco AnyConnect?
viewtopic.php?f=34&t=63030&start=15#p514797
Yes I did recently install cisco anyconnect. Ill kill that and see what happens. Thanks!
192.168.0.12
1234
